赵吾欣

来源:材化研工办 时间:2025-09-16


职称:讲师

通信地址:湖北省武汉市洪山区南李路28

邮编:430068

E-mailzhaowuxin0701@163.com


学习及工作经历

2009.09-2013.07 北京科技大学材料科学与工程学院  工学学士学位

2013.09-2022.01 北京科技大学新金属材料国家重点实验室 工学博士学位

2022.06-2024.06 哈尔滨工业大学(深圳)材料科学与工程学院 博士后

2024.9至今 湖北工业大学材料与化学工程学院工作


社会兼职


研究方向

奥氏体耐热钢、金属间化合物、高熵合金


研究课题

1、 国家自然科学基金青年科学基金项目,新型含铝奥氏体耐热不锈钢的纳米弥散析出调控和高温强化机制研究主持

2、 国家自然科学基金面上项目,多尺度γ'相强化型高熵合金的组织调控和中温韧化机制研究,参与

3、 国家自然科学基金面上项目,新型共格析出强化超高强度钢的塑韧化机制研究,参与


主要成果

1、代表性论文

(1). B.X. Cao, W.X. Zhao, L.J. Jing, Y.L. Zhao, J.X. Hou, S.Z. Yu, G.Q. Xie, W.H. Liu, T. Yang*, J. Wei*. Heterostructure high-entropy alloys with exceptional thermal stability and resistance towards intermediate temperature embrittlement. Journal of Materials Science & Technology. 188 (2024) 228-233.

(2). W.X. Zhao, S.H. Jiang*, W.H. Liu, X.Y. Peng, H. Wang, Y. Wu, X.J. Liu, Z.P. Lu*. Synergistic effects of microalloying and pre-straining on enhanced nanoprecipitation and creep property of alumina-forming austenitic stainless steels. Materials Science and Engineering A. 857 (2022) 143995.

(3). W.X. Zhao, D.Q. Zhou, S.H. Jiang, H. Wang, Y. Wu, X.J. Liu, X.Z. Wang, Z.P. Lu*. Ultrahigh stability and strong precipitation strengthening of nanosized NbC in alumina-forming austenitic stainless steels subjecting to long-term high-temperature exposure, Materials Science and Engineering A. 738 (2018) 295-307.

(4). W.X. Zhao, Y. Wu, S.H. Jiang, H. Wang, X.J. Liu, Z.P. Lu*. Micro-alloying effects of yttrium on recrystallization behavior of an alumina-forming austenitic stainless steel, Journal of Iron and Steel Research International. 23 (2016) 553558.

(5). C.C. Li, W.X. Zhao, H. Wang*, S.H. Jiang, X.J. Liu, Y. Wu, T.G. Nieh, Z.P. Lu*. Enhanced Corrosion Resistance of an Alumina-forming Austenitic Steel Against Molten Al, Oxidation of Metals. 94 (2020) 465-475.

(6). D.Q. Zhou, W.X. Zhao, H.H. Mao, Y.X. Hu, X.Q. Xu, X.Y. Sun, Z.P. Lu*. Precipitate characteristics and their effects on the high-temperature creep resistance of alumina-forming austenitic stainless steels, Materials Science and Engineering: A. 622 (2015) 91-100.


荣获奖励