姓名：刘省
职称：讲师
通信地址：湖北省武汉市洪山区南李路28号
邮编：430068
E-mail：liusheng@hbut.edu.cn
学习及工作经历
2008.9-2012.6 武汉大学动力与机械学院 获工学学士学位
2012.9-2018.6 武汉大学动力与机械学院 获工学博士学位
2018.7-2021.6 武汉大学动力与机械学院从事博士后工作
2021.8至今 湖北工业大学材料与化学工程学院工作
研究方向
高温金属结构材料，轻质金属材料加工
研究课题
1、 9%Cr马氏体耐热钢相参量演化对长时高温服役性能稳定性影响的调控研究，湖北工业大学博士科研启动基金项目，主持
2、超超临界锅炉用9%Cr马氏体耐热钢的显微组织调控与服役性能优化，湖北省教育厅科学技术研究计划青年人才项目，主持
主要成果
1、代表性论文
[1] Sheng Liu, Xinbin Hu. Thermodynamic calculations and heat treatments on phase transformation characteristics of 9Cr1Mo steel. Journal of Testing and Evaluation, 2022, 50(5): 2780-2790.
[2] Zhifang Peng, Sheng Liu, Chao Yang, Fangyu Chen, Fangfang Peng. The effect of phase parameter variation on hardness of P91 components after service exposures at 530–550°C. Acta Materialia, 2018, 143: 141-155.
[3] Sheng Liu, Chao Yang, Zhifang Peng, Fangfang Peng. An approach to 570°C/105h creep rupture strength prediction and safety assessment of Grade 91 components with reduced hardness after service exposures at 530∼610°C. International Journal of Pressure Vessels and Piping, 2020, 182: 104073.
[4] Xiao Wang, Zhengqing Zhou, Sheng Liu, Mingyu Huang. Investigation of the evolution of Geometrically Necessary Dislocation (GND) tensor in a type 316 steel by using In-situ EBSD technique. Materials Letters, 2020, 286: 129254.
[5] Sheng Liu, Chong Cui, Da Zhang, Chuang Wang, Xiao Wang. Strength degradation of 42CrMo steel in a thermal field and its characterization method. Materials Letters, 2020, 274: 128031.
[6] Zhifang Peng, Sheng Liu, Chao Yang, Huachun Yang. Correlation of hardness with maximum allowable stresses of Grade 91 steel. Materials at High Temperatures, 2022,39(6): 472-479.
[7] Sheng Liu, Ge Wan, Xiaokun Shen, Xian Li, Yuxin Peng, Chuansong Xia, Yifan Zhao, Xinbin Hu, Wei Long. The microstructure and mechanical properties of aluminum/steel welded joint by FSLW, Materials Science and Technology, 2023, 39:16, 2491-2500.
[8] Sheng Liu, Xian Li, Xinbin Hu, Xiao Wang, Fubon Zhang, Yu Zhu. Characterization of microstructure and mechanical property evolutions of 42CrMo steel served at elevated temperatures. Journal of Materials Engineering and Performance, 2024, 33(4): 1732-1740.
[9] Xinbin Hu, Chuansong Xia, Hualan Zhang, Ge Wan, Sheng Liu, Wei Long. The microstructure and mechanical properties of aluminum/steel welded joint with Ni foil interlayers by FSLW, Journal of Adhesion Science and Technology, 2024, 38(9): 1413–1425.
[10] 沈小琨，赵一帆，万葛，刘省，胡心彬. Zn中间层对镁/钢搅拌摩擦搭接焊组织与性能的影响. 特种铸造及有色合金, 2023, 43(12): 1647-1653.
[11] 彭宇欣,刘省,胡心彬. Ni中间层对6061T6铝合金/08Al异种金属电阻点焊接头力学性能及组织的影响.中国机械工程, 2024.
荣获奖励
1、江苏省电力科学技术进步二等奖，2020年
